Banner image
Understanding the choices for building controls (IP 1/14)

Understanding the choices for building controls (IP 1/14)

by Andy Lewry (07-Feb-2014)


Buy this book Delivery time might be 4-5 days due to limited staff

Book Description

The control of energy in smaller buildings is generally poor, despite the availability of a range of tried and tested systems incorporating both mature and innovative technologies. The installation of heating, ventilation and air conditioning (HVAC) zone controls, optimising controllers for wet heating systems, and lighting controls are encouraged by the government. Financial support through the enhanced capital allowances (ECA) scheme and good practice guidance from the Carbon Trust is provided. Despite this, specifications are often limited to the minimum requirements; innovative technologies, such as pre-programmed packaged building energy management systems (BEMS) and demand control ventilation (DCV), are rarely applied.
This Information Paper addresses the barriers to applying energy efficient control systems by providing simple explanations of innovative technology, what it can do, where and why it can and should be used - the pros and cons, and how to get to an effective solution in practice.


1 Introduction
2 Control systems available
3 Specification of controls and control systems
4 Linking functionality to a servicing strategy
5 Understanding end user needs
6 Key issues to address
7 Conclusion

A4, 16pp, 5 line drawings, 2 photos

Buy this book

Customers who bought this title also bought

Renewable energy sources: how they work and what they deliver: 4-part set (DG 532 set)
Operating BEMS: A practical approach to building energy management systems (IP 2/14)
Reducing thermal bridging at junctions when designing and installing solid wall insulation (FB 61)
Design of low-temperature domestic heating systems: A guide for system designers and installers (FB 59)
Site layout planning for daylight
(IP 23/12)